Twinning with incoming SIP CID wrong

[JohnsonOps]

When i get an incoming call on a SIP trunk the outgoing twinning call isn't passing the CID corectly. I get a garbled CID, now it works ok on an incoming analog call.

When looking at monitor traces I think the problem lies in the fact that the IP address is appended to the phone number so when it passes the CID with that full string it just uses garbage for the CID on the cell phone.

64704872mS SIP Rx: UDP yyy.yyy.yyy.yyy:5060 -> xxx.xxx.xxx.xxx:5060

                     BYE sip:PatrickJohnson@xxx.xxx.xxx.xxx:5060;transport=udp SIP/2.0
                     Via: SIP/2.0/UDP yyy.yyy.yyy.yyy:5060;branch=z9hG4bK25768079;rport
                     From: <sip:18479912233@yyy.yyy.yyy.yyy>;tag=as01754069
                     To: PatrickJohnson <sip:PatrickJohnson@xxx.xxx.xxx.xxx>;tag=9219c8493193287b
                     Call-ID: 0f664eae1ebd105362fdef007a1527b8@yyy.yyy.yyy.yyy
                     CSeq: 103 BYE
                     User-Agent: LES.NET.VoIP
                     Max-Forwards: 70
                     Content-Length: 0


64704886mS CMLineRx: v=0
            CMReleaseComp
            Line: type=IPLine 10 Call: lid=0 id=1151 in=2
            IE CMIERespondingPartyName (228) Palatine,IL
            IE CMIERespondingPartyNumber (230)(P:0 S:100 T:0 N:100 R:4) number=18479912233@yyy.yyy.yyy.yyy
            IE CMIEDeviceDetail (231) LOCALE=enu HW=8 VER=4 class=CMDeviceSIPTrunk type=0 number=10 channel=0 gain=32
  64704886mS CMCallEvt:    0.1151.2 38 SIPTrunk Endpoint: StateChange: END=A CMCSConnected->CMCSCompleted

xxx.xxx.xxx.xxx and yyy.yyy.yyy.yyy added for incoming ip and outgoing ip respectively to protect the innocent

Anyone know of how to massage the incoming CID on SIP so that it will be formated like a regular 10 digit phone number?

 

[Bas1234]

Here are some explanations/call logs of sip.

http://members.optusnet.com.au/hago...IP configurations for Release 4 by Mr IPO.pdf

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Bas1234]

You mean you see in the display of the phone a number like 0123456789@xxx.xxx.xxx.xxx?

What version are you running?
Upgrade to 4.1(9) then your problem will be solved it then will just show the 10 digits.


greetzzz...Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[JohnsonOps]

I don't see the full 0123456789@xxx.xxx.xxx.xxx in the display I am on the [blue]latest 4.1 build,[/blue] I do get the 10 digits only but my problem is with how it is represented internally and sent out when send CID of incoming call is checked in the twinning tab.

Calls coming in via analog are twinned with correct info but SIP incoming gets garbled. instead of getting 123456789 CID on the cell phone I get something like 8477780000.

 

[Bas1234]

Have you tried to ticked or unticked Twinning in the System tab?

Only some providers support this option, i don't nowhat happens when you've ticked it and your provider doesn't support it.

greetzzz....Bas

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________