We have a StarTalk System with nine extensions. All the phones have a Page-All button programmed on them. Is their a way to turn the Page volume down or off on two of the phones? Two phones are right next to each other so we get feedback, and one is in a conference room. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Turn down or off Paging Volume?
- Thread starter jaxx001
- Start date
Yes, you can turn off both the ability to page and to receive pages under Capabilities for the required sets.
--DB
--DB
- Thread starter
- #3
Page: Y/N | this turns off the ability to make a page from a telephone set
Page Zone: 1-6, None | This sets a page zone or turns off in it's entirety the ability to receive page
--DB
Page Zone: 1-6, None | This sets a page zone or turns off in it's entirety the ability to receive page
--DB
curlycord
Programmer
To turn volume down in quite area use same setting as Background Music:
F86, hit volume bar a few times, F#86.
=----(((((((((()----=
curlycord
F86, hit volume bar a few times, F#86.
=----(((((((((()----=
curlycord
CurlyCord,
Never thought to use the Background Music feature to adjust the paging volume. Does that actually work? Gonna have to play tomorrow at the office..
--DB
Never thought to use the Background Music feature to adjust the paging volume. Does that actually work? Gonna have to play tomorrow at the office..
--DB
curlycord
Programmer
Yes, also now that I think about it you should be able to turn down the volume during an actual page too.
=----(((((((((()----=
curlycord
=----(((((((((()----=
curlycord
- Status
Similar threads
- Locked
- Question
