Does anyone have the pinouts for TTY ports on the NTDW65AA MC32S or NTVQ01BB MC32 VGMC?
I have both of these cards and cannot get them to accept keys on the terminal session. I can receive text and see them boot, but can not interrupt boot or interact with them. I've tried multiple PCs with serial ports and know that they are working fine with other cards. I've tried using an "ITG Card Adapter" A0852632 with female DB9 and E-LAN/T-LAN ports. I've tried making connections from the 50 pin connector and using a pinout I found for MIRAN cards. I've tried making a cable for the mini-din connector on the front of the cards but I can't seem to find the right pinout. It seems unlikely that both cards are bad.
I'm also trying to figure out if there is a config file I can place on the CF to configure the IP and then perhaps telnet to the card. I've briefly tried setting up a BOOTP server to assign an IP and I can see the request from the card and my server responding to it but no IP assignment.
Any info is greatly appreciated.
I have both of these cards and cannot get them to accept keys on the terminal session. I can receive text and see them boot, but can not interrupt boot or interact with them. I've tried multiple PCs with serial ports and know that they are working fine with other cards. I've tried using an "ITG Card Adapter" A0852632 with female DB9 and E-LAN/T-LAN ports. I've tried making connections from the 50 pin connector and using a pinout I found for MIRAN cards. I've tried making a cable for the mini-din connector on the front of the cards but I can't seem to find the right pinout. It seems unlikely that both cards are bad.
I'm also trying to figure out if there is a config file I can place on the CF to configure the IP and then perhaps telnet to the card. I've briefly tried setting up a BOOTP server to assign an IP and I can see the request from the card and my server responding to it but no IP assignment.
Any info is greatly appreciated.