Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TTI Wave off tone

Status
Not open for further replies.

bengon1

Vendor
Jul 29, 2010
18
US
Hello-

We are having an issue with TTI at remote LSP's across the Network. When technicians attempt to TTI in phones we get wave off tone.

I have checked sys parameter features and status TTI. Complete at 100%. Disabled/Enabled TTI and no change to TTI of phone in/merge.

We have alarms on the main CM which are 1412 and 1392 which show on Avaya Documentation to ignore.

Any help is greatly appreciated.

bengon1
 
you should get a denial event when the merge code fails.

Make sure you do not have a conflict with the xported station number and your uniform dialplan.



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
Thanks for the heads up...

This does not to appear to be a xported or dialplan issue. This works fine if the ext is manually ported, and when I change the system parameters on the core, TTI works fine. Looks to be a issue with the Media Gateway. Have you ever come across anything like this?

Thanks in advance!

 
does "list config media-gateway x" show "t" or "p" on the ports?
what do you get when you go off hook?
what are you dialing, what is returned?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top