TTI Complete - some ports not translated

[dialtoneuk]

I all,
I;ve been looking at a number of issues with TTI/PSA not working on my system. The first showed a denial event.

denial event 2059: SecCode change disallowed

2059 SecCode change disallowed - Change of security code through Feature Access Code not supported for IP.

My understanding is that it can't work/won't work over IP, is that correct?


The second showed the status of the TTI/ PSA feature.

completed - some ports not translated: The last
background maintenance task stopped when resources were
exhausted, and some ports were not translated.

Is there a way to restart this or find out why it did not complete?

D

 

[definityandcmuk]

as far as I know IP users can't change their security code as it is physically entered into the IP set

what does the status periodic screen show you

 

[dialtoneuk]

status periodic-scheduled

MO Current Current Previous Cycle Rate of
Type Cycle % Cycle Duration Completed
Complete Active? (hr:min:sec) Cycles

PERIODIC System Critical 100% n 00:00:46 3.9/hr
MAINTENANCE Shared Resource 100% n 00:01:57 4.0/hr
Single User 18% y 00:12:25 4.0/hr
Total 00:15:10

Start Time of Current or Previous Cycle: 04/25-14:20:29

Pre - SCHEDULED MAINTENANCE n 00:00:09

SCHEDULED System Critical 100% n 00:02:51 1.0/day
MAINTENANCE Shared Resource 100% n 00:12:53 1.0/day
Single User 100% n 00:26:38 1.0/day
Total 00:42:22

Start Time of Current or Previous Cycle: 04/25-01:00:17


Command:


All appears to be working. I ran the 'status periodic' command a couple of times and could see it updating.


D

 

[Dunstan]

You can force it to update by turning TTI off in Cha sys fea and then turning it right back on.

 

[dialtoneuk]

All working.
Fortunately we had a patch applied to the switch last night for another issue and the reset 4 that was carried out as part of the patch seems to have sorted it.

Thanks for the quick response.

D