TSE6.3 to CUCM 10.5 SIP Trunk

[coolfalcon]

Dear all,

i have An Ianttend system connected to TSE6.3 (SIP-TRK) and the Mxone TSE6.3 is connected to another CUCM 10.5 system through
Qsig Link and SIP Trunk
Inattend <<------SIP TRK--->> Mxone TSE6.3 <<------SIP Trunk-->> Cisco CUCM 10.5
, when directing the calls from the Mxone to CUCM through the SIP Trunk we have the following problem :
the Ianttend can call and Cisco CUCM endpoint successfully and V.S , but when the Inattend try to Transfer a call to the CUCM phones
transfered successfully but NO speech path
Inattend Transfer failed in all of the call types :
CUCM to CUCM
MXone to CUCM


please not that i used the Cisco SIP trunk Template in the mxone - MTS. and No Transfer Problem appears when using Qsig Link


Regards

 

[Satellite1900]

Hi,
please prints the configuration of all SIP Trunks, TCA configuration, PARNUM=118.

\Satellite1900