Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TSE6.3 to CUCM 10.5 SIP Trunk

Status
Not open for further replies.

coolfalcon

Technical User
May 17, 2011
59
JO
Dear all,

i have An Ianttend system connected to TSE6.3 (SIP-TRK) and the Mxone TSE6.3 is connected to another CUCM 10.5 system through
Qsig Link and SIP Trunk
Inattend <<------SIP TRK--->> Mxone TSE6.3 <<------SIP Trunk-->> Cisco CUCM 10.5
, when directing the calls from the Mxone to CUCM through the SIP Trunk we have the following problem :
the Ianttend can call and Cisco CUCM endpoint successfully and V.S , but when the Inattend try to Transfer a call to the CUCM phones
transfered successfully but NO speech path
Inattend Transfer failed in all of the call types :
CUCM to CUCM
MXone to CUCM


please not that i used the Cisco SIP trunk Template in the mxone - MTS. and No Transfer Problem appears when using Qsig Link


Regards

 
Hi,
please prints the configuration of all SIP Trunks, TCA configuration, PARNUM=118.

\Satellite1900
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top