Trying to call St. Croix (Definity 3gsi)

[imalc3142]

I am trying to call St. Croix (area code 340) the Definity is kicking me out after I dial the area code plus first three numbers. We can call all other area codes (as far as I know) as well as international calls.

Any ideas on what I need to change in the Definity?

Thanks for your help.

 

[rgtrgt]

disp ars a 1340, send a paste

 

[imalc3142]

Capture from diap ars a 1340

ARS DIGIT ANALYSIS TABLE
Location: all Percent Full: 9

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
1340 11 11 deny fnpa n
1345 11 11 deny fnpa n
135 11 11 p3 fnpa n
136 11 11 p3 fnpa n
137 11 11 p3 fnpa n
138 11 11 p3 fnpa n
139 11 11 p3 fnpa n
140 11 11 p3 fnpa n
1400 11 11 deny fnpa n
141 11 11 p3 fnpa n
1411 4 4 p1 svcl n
142 11 11 p3 fnpa n
143 11 11 p3 fnpa n
144 11 11 p3 fnpa n
1441 11 11 deny fnpa n

 

[rgtrgt]

it's denied, change ars a 1340 & put p3 for route pattern

 

[imalc3142]

Thanks