Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trying to block 9.0 calling

Status
Not open for further replies.
dctechguy

dctechguy

Technical User
Oct 8, 2010
10
US
CM r6.1, I have set up a partition and a calling search space and then added in the Route Pattern 9.0 to have this pattern Blocked with "call rejected" and still can call 9,0 XXXXXX. What am I missing?
 
Sort by date Sort by votes
run DNA and it will tell you what RP you are hitting.
 
Upvote 0 Downvote
Is the same CSS applied at both the Route Pattern and device level?

~Han

Do the day and let the day do you.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mikedphones
  • Locked
  • Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
220
mikedphones
mikedphones
Russell35674
  • Locked
  • Question
Cisco VG310/320 migrate from SCCP to MGCP
Replies
1
Views
225
whykap
whykap
Judahbenhur69
  • Locked
  • Question
CUCM 12.5 to Ver 14
Replies
0
Views
140
Judahbenhur69
Judahbenhur69
Ahmed626
  • Locked
  • Question
Need to register NEC DT730G on CUCM
Replies
0
Views
109
Ahmed626
Ahmed626
DTGMI
  • Locked
  • Question
Nortel to Cisco VG310 & 4431 SIP GWs
Replies
0
Views
80
DTGMI
DTGMI

Part and Inventory Search

Sponsor

Back
Top