Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trunking IP Hipath 4000

Status
Not open for further replies.

Voz05

Technical User
Feb 2, 2023
5
CL
thread965-1740928

Hi, everyone.
first time asking something in this forum but I have been consulting this for a long time to know more about hipath 4000.

I need to create a new trunking ip using a stmi4, I have already some ip trunk created as I'll show below.

ADD-TDCSU:NEW,1-01-079-0,250,201,0,0,150,32,32,"TRK IP ",168,"ECMAV2",8,,NONE,,,,GDTR,N,TIE,NONE,N,0,,,,,,,31,MANY,78,0,1,1,EMPTY,250,1,N,,,,,,16,8,1,10,,EC&G711&G729A&HG3550,,150,CIR,Y,SECURE,0,60,60,HG3550IP,1&&30,N,1,,0,0,0,0,0,N,,NONE;

I don't know what "168" means before "EACMAV2". I've been comparing this value whit other trunking ip created on other hipath 4000 units working, but I don't completly understand.

I'll be deeply greatfull if anyone can help me.

(Sorry if mi english is too poor but I'm a little rusty [tongue].)
 
in comwin its write - Destination system number
 
Open Comwin
Log on to HiPath

CHA-FUNCT:REGIN=Y;

Click up top 'Macro/Retreive System Variant'

After that then
REG-TDCSU;

Then RIGHT MOUSE CLICK on the line (ADD-TDCSU) - (anywhere on the line) and click 'MML-Editor'
 
Thank you akineo and sbcu.
I already knew what was the parameter's name, maybe I did't express myself in the right way becouse of mi english [tongue].

Anyway I Already resolved the problem, thank ypu so much for your help!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top