Trunking between an HP ProCurve 2424 Switch & 2600 Router

[1935]

Through the menu on the HP ProCurve Switch I was able to set an ip address for the default vlan as well as a second vlan I named vlan2. I untagged all the port that are not associated with vlan2.

Like this:

Default_VLAN VLAN2
Port 1 Untagged NO
Port 2 Untagged No
From Port 1-11 are all on default_vlan

Port 11 No Untagged
Frome Port 11-22 are all on VLAN2

I set the trunking on port 1 which is where the 2600 router is plugged into.

It still won't route.

What am I doing wrong?

Thanks!

 

[kmg365]

Do you have the correct ios version. I believe you need IP Plus in order to do trunking. You definitely can't do trunking with just the IP version of IOS.

Good luck,

Jim

 

[llefebure]

Maybe I'm missing something here, but why are you trunking to a router? A 2600 router can't route enough packets per second to fill 1 100Mb line, let alone several.

From the way you have worded this, it seems you want the router to route between the 2 VLANs. What are you trying to accomplish?

-Lance