Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trunk to Trunk Transfer Enable

Status
Not open for further replies.

04dawmingsu

Vendor
Mar 7, 2007
25
SA
HI TO ALL COULD ANYONE KNOWS HOW TO ENABLE THE TRUNK TO TRUNK TRANSFER FROM ERICSSON MD110 SYSTEM?


Alex Miclat
 
Hi' post ROCAP:ROU=x; and the route you want to transfer between, TCMAP:CON=T; and CADAP;
 
HERE THE ROUT

<ROCAP:ROU=6;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
6 0120000000000010 5 2110000010 0 30 128 00151515 111111100031 111111

<TCMAP:CON=ALL;TRAFFIC GROUP MATRIX DATA
CON = T B
A 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1
2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
9 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1
10 0 1 0 0 0 0 0 0 0 1 1 0 0 0 0 1
11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
14 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
15 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
CON = C B
A 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1
2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1



VERSION=CXP1010104/2/BC12SP6/R3A
17:45:38
WED 14 MAR 2007
END

Alex Miclat
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top