Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trunk to trunk call transfer don't release even after it's patch. 1

Status
Not open for further replies.

passion1234

Technical User
Apr 14, 2011
13
PH
We have a Nortel opt. 81c, we are able to patch a trunk to trunk call, however, the two patch trunks don't release even if it's already off hook. I already set the near end and far end disconnect.
But still. I manually release each trunk. How can it be disconnected after such calls?

thanks.
 
What are the trunk types?

If you are using COTs (NT5K82??) then there is no supervision, thus no call clearing.
 
Trunk to Trunk don't work well on COTs unless you have disconnect supervision on the lines.

Ask the CO for disconnect supervision and you will be good to go.
 
yes we are using COT, tried FED and NED = ETH and SUPN_= NO but still it won't.

Tried also SUPN = yes STYP = bts pip but still.

Do I need to replace trunkcards?


thanks
 
Don't wait your time on this if the Co is not providing disconnect supervision on the COT there is nothing you can do no patch is going to fix that.

Ask the CO for disconnect supervision.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top