Trunk Test calls

[navy1]

I want to test individual outbound trunks. Trunk group setup as tie. Dial access set to yes. COR changed on my extension. I dial FAC code, say 1405, then dial port broken down as 220114, then dial test number. Could I also use the trunk group TAC number to test a specific port/channel or does TAC access grab whatevers idle? Thanks

 

[Westi]

What system are you working on?

Joe W.

FHandw., ACA, ACS

If you can't be good, be good at it!

 

[navy1]

Avaya PBX Thanks

 

[Westi]

IP Office, Definity or CM

Joe W.

FHandw., ACA, ACS

If you can't be good, be good at it!

 

[navy1]

Avaya Comm Mgr - have S8700

 

[kwing112000]

you may want to post in the definity forum then.

Kevin Wing
ACA- Implement IP Office
Carousel Industries

 

[Westi]

http://www.tek-tips.com/threadminder.cfm?pid=690

that is the link to the Definity forum, there are most likely people that know that and can help you

Joe W.

FHandw., ACA, ACS

If you can't be good, be good at it!

 

[392]

Your test code is for individual trunks only, it won't work on a TAC, since its purpose is to identify a pool of trunks. You can always set up a test trunk group and move members into it one at a time and test then, then move them back.