Trunk select on Hicom 130

[tJasC3]

Does anybody know how to select a particular external line on the Hicom130 from an analogue phone?
I am now on a DIY solution of a small electronic box to connect the external line to an internal number. There must be some way to do it through the system.
It is mandatory for me, since one of the lines is a leased line and I must be able to select that when I want.
Secondly I want any station pressing 0 to access any available line BUT the leased, as they cannot dial through this line.
thank you in advance

 

[junpatz88]

tJasC3,

I just accidentally bumped on your question regarding Hicom 130 and you wanted to know how to access a particular line from your trunkline which is dedicated ex. a direct line with a dedicated user or access heres the procedure:
1. your hicom 130 has a default access for each line ex. line 1 : is 801, line 2: is 802 and so forth depending on how many trunklines you got.
or 2.select an access or digit in your dial plan(be sure it wont collide with your default feature access codes ex.digit 8 be sure to have this user has different dialling plan if you wanted this line not to be accessed by other users or by system wide access for trunkline.

So if you wanted this leased line can only accessed by you just do the no.2 procedure so that general access code for for external call is "0" then create another access code for another digit to access your leased line either "9" or "6" and block the particular trunkline to all users and allow only your local/phone to access only.

I hope this will help you,

Edison