trunk - local busy

[MATOVTZ]

Hi!
I can not remove trunk in ISDN route. Revision is BC9.1 and have CNI 85. I try RFPUI but not help.
<rodap:rou=23;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
23 SL60 H'00000400 H'00000000 H'00B00000 NO

END

<roedp:ROU=23,TRU=all;
ROUTE EQUIPMENT DATA
ROU TRU EQU SQU INDDAT
23 001-4 001-1-10-04 H'000000000000
23 001-5 001-1-10-05 H'000000000000

END

<susip:rou=23,TRU=all;
STATUS INFORMATION AT 09:46:17 03FEB03
ROU TRU TYPE TRAFFIC STATE/PTR LINE STATE/PTR ADD INFO
23 001-4 TL60 IDLE #00CE LOCAL BUSY #00A0
23 001-5 TL60 IDLE #00CD LOCAL BUSY #009F
END

<roeqe:ROU=23,TRU=1-4;
ROEQE:ROU=23,TRU=1-4;
SURE? (YES/NO)
<y;
NOT ACCEPTED
TRUNK IS BUSY

How I can read linestate and change it?
Thank you for help!
Matovtz

 

[Bartjo]

First thing you can try is block the device,
When the call is ended the PBX will block the line. After the lines are free you can remove them
Blocking:
BLEQI:EQU=

Good luck!

 

[baf]

RFPUI:UNIT=DTRS1,LIM=1;
RFBOI:BPOS=1-1-10;

 

[m110d]

Did you RFPUI:LIM=1,UNIT=TLP60&SLP60;
This should release the circuits.

 

[patcher]

LINE STATE is stored in DTRS1. RFPUI this unit and you are sweet but your next problem is, if there is A number presentation this will disappear if your DTR is not updated by CNI upgrade. For safety restart this unit only if there is no external traffic. //patcher

 

[MATOVTZ]

Thanks for all!
RFPUI:unit=slp60&tlp60 solved my problem!