trunk impossible... please help !!!

[govsco]

Hi everyone, i´m a bit newbie... i´m trying to setup my trunk provider with some peer configurations i found in google, however none seems to work... i catch the register message from my VOIP client with the same trunk, is it possible with this to know what config and register string use in the trunk?

at final lines i found this... "Authentication Scheme: Digest"... is always the same for all?

i replaced username and host with XXXXX for security...

----------------------------------------------------------
Via: SIP/2.0/UDP 192.168.0.10:48752;branch=z9hG4bK-d8754z-4aa7fc3895a53f2e-1---d8754z-;rport
Transport: UDP
Sent-by Address: 192.168.0.10
Sent-by port: 48752
Branch: z9hG4bK-d8754z-4aa7fc3895a53f2e-1---d8754z-
RPort: rport
Max-Forwards: 70
Contact: <sip:XXXXXXX@192.168.0.10:48752;rinstance=c177369473578bba>
Contact URI: sip:XXXXXXX@192.168.0.10:48752;rinstance=c177369473578bba
Contact URI User Part: XXXXXXX
Contact URI Host Part: 192.168.0.10
Contact URI Host Port: 48752
Contact URI parameter: rinstance=c177369473578bba
To: "XXXXXXX"<sip:XXXXXXX@XXXXXXX.com>
SIP Display info: "XXXXXXX"
SIP to address: sip:XXXXXXX@XXXXXXX.com
SIP to address User Part: XXXXXXX
SIP to address Host Part: XXXXXXX.com
From: "XXXXXXX"<sip:XXXXXXX@XXXXXXX.com>;tag=b43a0714
SIP Display info: "XXXXXXX"
SIP from address: sip:XXXXXXX@XXXXXXX.com
SIP from address User Part: XXXXXXX
SIP from address Host Part: XXXXXXX.com
SIP from tag: b43a0714
Call-ID: OGIxOGEyNWMzOWFjN2RlZTM5NDc2M2I1MTUzMGY1NjI
CSeq: 2 REGISTER
Sequence Number: 2
Method: REGISTER
Expires: 3600
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO
User-Agent: X-Lite release 4.5.2 stamp 70142
Authorization: Digest username="XXXXXXX",realm="XXXXXXX.com",nonce="51e824070000be7cb461d936962c7e08ec607fa72635937f",Authentication Scheme: Digest
username="XXXXXXX"
realm="XXXXXXX.com"
nonce="51e824070000be7cb461d936962c7e08ec607fa72635937f"
uri="sip:XXXXXXX.com"
response="5a168209b7f5718f7782e3a56c7fdba1"
algorithm=MD5
Content-Length: 0

 

[cruzades]

How far is your config? how about trunk license? and third party license?

 

[busster]

To which SIP provider are you trying to connect?

Clowns to the left of me, jokers to the right, here I am, stuck in the middle with you.

 

[govsco]

Hi... thanks for answer... this is my sip.conf for the trunk... but it doesn´t work...

Sip.conf:
[telexfree]
context=telexfree
type=friend
defaultuser=USER
secret=SENHA
domain=telexfree.com
fromuser=USER
fromdomain=telexfree.com
host=telexfree.com
insecure=port,invite
qualify=yes
allow=all
dtmfmode=rfc2833
reinvite=no
canreinvite=n

... I can connect to the trunk with Sip client X-Lite ... and then i capture the register message with Wireshark... to find any clue for the config in asterisk...

thank you again...