Trunk group in Germany having issues.

[avidbumble]

I have an LSP in Germany, off of an ESS in the States. When people call from outside of what is considered the local area code in Germany to a DDI in the LSP the call hits the phone system but they are going to the operator which is here in the states in stead of the desired DDI. I am new to the international thing. I am working with Deutsche Telecom and they say its not them its something we are doing. I have been looking and trying to figure it out but I am not having luck.

My latest thought revolves around the Supplemenatary Service protocol. Currently set to A (national) I was wondering if this should be set to C(ETSI) Does anyone have any thoughts...

 

[98Converter]

This is how our ISDN trunk group in our LSP site in Germany is set... Not sure about your config, but this may help.


TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send National IEs: 6
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: c Digit Handling (in/out): overlap/overlap
Digit Treatment: insertion Digits: 9*
Trunk Hunt: cyclical


Thanks,
98C

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[avidbumble]

Thanks 98converter. I am going to try it. The only thing I am not sure on is the digit treatment. I have a call out to deutsche telcom to see if they can send us the same number of digits. From Trace routes I have done Deutsche telecom seems to be sending us different lengths. Thanks again.....