Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TRUE TYPE FONTS in PCL5 1
- Thread starter ckboy
- Start date
-
1
- #2
For a TrueType font to be embedded into a PCL file,
it must first be converted into PCL format.
I donn't know of a tool that will do that directly, but
I have had success in the past in "printing the alphabet"
to a file through a windows driver, and then editing
the resulting file to make the download file.
It seems that the current drivers tend to remap the
characters to different symbols making the task more
difficult. In any case, you should study the soft font
section(s) in the PCL technical reference. This wasn't
problematic on Win 3.1.
Assuming you had the PCL font, the download sequence
would be something like this, assuming "123" as the
user assigned font ID...
<esc>*c123D Assigns the ID of 123 for the font
Font Data The PCL font file itself
<esc>*c5F This makes the downloaded font permanent
<esc>(123X Then later this code enables the soft font
with an ID of 123 as the primary font when
you want to us it in the PCL job.
Obviously, that hard part is to create the PCL font.
If you have FLASH memory in your LaserJet, I believe
that native TrueType fonts can be stored there
permanently, and the printer will convert them to PCL
when they are called into use.
Jim Asman
jim@spctra.wimsey.com
it must first be converted into PCL format.
I donn't know of a tool that will do that directly, but
I have had success in the past in "printing the alphabet"
to a file through a windows driver, and then editing
the resulting file to make the download file.
It seems that the current drivers tend to remap the
characters to different symbols making the task more
difficult. In any case, you should study the soft font
section(s) in the PCL technical reference. This wasn't
problematic on Win 3.1.
Assuming you had the PCL font, the download sequence
would be something like this, assuming "123" as the
user assigned font ID...
<esc>*c123D Assigns the ID of 123 for the font
Font Data The PCL font file itself
<esc>*c5F This makes the downloaded font permanent
<esc>(123X Then later this code enables the soft font
with an ID of 123 as the primary font when
you want to us it in the PCL job.
Obviously, that hard part is to create the PCL font.
If you have FLASH memory in your LaserJet, I believe
that native TrueType fonts can be stored there
permanently, and the printer will convert them to PCL
when they are called into use.
Jim Asman
jim@spctra.wimsey.com
At we mention our TTDOWN.exe and .dll, which can convert TrueType fonts into PCLETTO Type 15 (.SFT) format. .SFT fonts can have more then 256 characters in them and will only work with PCL5e printers.
We also have programs that convert TrueType fonts into our proprietary FastFont (.FF1) format. Once in .FF1 format, we can then map a subset of 256 characters to convert into PCLEO (.SFS) format. .SFS fonts are limited to 256 characters and will work with PCL5/5e/5c printers.
These tools are only available on a custom/OEM license basis.
We also have programs that convert TrueType fonts into our proprietary FastFont (.FF1) format. Once in .FF1 format, we can then map a subset of 256 characters to convert into PCLEO (.SFS) format. .SFS fonts are limited to 256 characters and will work with PCL5/5e/5c printers.
These tools are only available on a custom/OEM license basis.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question