Troubles with BFS

[CTAKAH]

Hi all.
I have a troubles with one TN after assigning BFS monitoring on it.
After I've assigned and then removed BFS key from monitoring set, ovl 11 have crashed and I've lost settings for that(ex-monitoring) TN.
Now I can't print (it loops after BFTN string) or remove monitored TN.

Opt 11C rel 22.46.

please help if you got any solutions.

thanks in advance.

 

[Reusser]

Sounds like you may have software corruption. If you can not print the TN but can print the DN. First step is to remove anything you can with the set in trouble. Second, do a back-up in load 43, then reload the switch - If problem still exists, you will need you switch vendor or Nortel to get in and clear the affected TN and or DN.

 

[CTAKAH]

Done by power-cycle the switch.