I setup up a basic point to point vpn using netgear fvs336g v3 firewalls. I went off the netgear setup options for this from there website. I can get both IP phones to connect to IP office at main site. Both phones show up in system status and I can ping both. My problem is that only one phone has dial tone. If I place a call from the working phone eventually the other phone will have dial and I can place call. Once I hang up both phones will work for a bit then the one phone with loose dial tone.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Trouble with remote IP phones connecting through netgear point to point vpn back to main office R9.1
- Thread starter mode1
- Start date
Similar threads
- Locked
- Solved
- Locked
- Question
- Locked
- Question