Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trouble with CP150 connecting via IE

Status
Not open for further replies.

lcns

Technical User
Jan 29, 2007
26
US
Having trouble setting up a new CP150, changed the IP from defualt via serial to 192.168.1.50, laptop to 192.168.1.1

subnet 255.255.255.0 on both

Launched IE - to connect to CP manager to initialize but I cannot connect?

IE Says it opening the page and then times out.

Any ideas?
 
I hate to say ti, but it sounds like pilot error...try defaulting the CP and trying changing the IP again and see what happens.
 
What is the best way to default it?
 
If you need to default it, you default it thru the phone using F983 and the default sequence.

This will default EXERYTHING...
 
Ensure that when you change the address you power cycle the call pilot to allow the address to take effect.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top