I am able to log into the CM via putty, but am having trouble from there trying to telnet into our G450. I'm getting a "Temporary failure in name resolution Host name lookup failure". I've tried using the console port but it didn't work so I'm at a loss at how I'm supposed to log in.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Trouble login into g450 from cm
- Thread starter jlroeder
- Start date
- Thread starter
- #3
- Thread starter
- #5
montyzummer
IS-IT--Management
The serial cables are a specific pin out , so just to touch back on kyles question what is the exact behaviour you are experiencing?
Have you tried arp -d from command prompt and then connecting via the services port(lan) can you actually ping the 192.11.13.6 address with you as 192.11.13.5 and the subnet as 255.255.255.252?
ACSS (UC/SBCE/SM/SME)
Not that they mean a thing anymore , get a brain dump pass the test crash the system.
Have you tried arp -d from command prompt and then connecting via the services port(lan) can you actually ping the 192.11.13.6 address with you as 192.11.13.5 and the subnet as 255.255.255.252?
ACSS (UC/SBCE/SM/SME)
Not that they mean a thing anymore , get a brain dump pass the test crash the system.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question