hollye4488
MIS
We recently upgraded from Definity 1.2 to CM 5.2. and simultaneously expanded into a new building. Now when the Operator in the new building tries to forward outside inbound calls to an internal extension (but in another port network connected by a gateway to the same 8720 server) which the end-user has forwarded off-net to their cell phone, they get an error tone and can't complete the transfer.
As I suspected, the trace shows denial event 1741: Transfer trunk to trunk D1=0x8524 D2=0x1936.
This has never been an issue before... am I correct in assuming the newer software is "smarter" and knows to block calls which previously slipped through?
The obvious solution might be to simply change the COR on the Operator phones to not restrict trk-to-Trk Transfer Override, but I don't really want them to be able to transfer calls directly to external numbers since they handle a variety of calls from various toll-free numbers. Does anyone know of another option?
As I suspected, the trace shows denial event 1741: Transfer trunk to trunk D1=0x8524 D2=0x1936.
This has never been an issue before... am I correct in assuming the newer software is "smarter" and knows to block calls which previously slipped through?
The obvious solution might be to simply change the COR on the Operator phones to not restrict trk-to-Trk Transfer Override, but I don't really want them to be able to transfer calls directly to external numbers since they handle a variety of calls from various toll-free numbers. Does anyone know of another option?