Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Translations not saving to LSP

Status
Not open for further replies.

skara

Technical User
Jan 23, 2003
118
GB
Here is the situation, I have a S8300/G700 in the main location and 3 G700/S8300 LSP gateways in 3 other countries. When translations are saved each night they are only saving to 2 of the LSP's and when I try and force a save translations to the failing LSP I get an error saying "cannot access the standby server at this time
 
I had the same problem and eventually I found out that the IP address in the Wed Browser settings for one of my LSP was incorrect. Check if the addresses are correct in both the main server and the lsp.
 
Thanks for the reply, I have checked this and the correct information is in the main server and the LSP.
 
Hi,
I had the same problem. Under security settings on S8700. Can't remember whether the 'shell' option is to be selected or de-selected, but that fixed it for me.

Rod
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top