Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

translation pattern configurations

Status
Not open for further replies.

rmcguire80

IS-IT--Management
May 31, 2012
106
US
Hello,

Im trying to set up a translation pattern configuration which will remove the beginning 3 digits of a number....for example I have number 123-4567, I want to have my pattern remove 123 and just dial 4567

Any help would be appreciated

thanks
 
Trans Pattern: 1234567
Partion: Internal (or whatever partition you need this for)
CSS: Site_A
Called Party Transform Mask: 4567

HTH,

Please Vote Hopeful Posts

Han


The great use of life is to spend it for something that outlasts it. ~William James
 
if I want this to apply to any numbers which begin with prefix 123 how would I write the pattern then, 123XXXX, so it applies to any number which begin with 123, where I just want it to remove the 123 and dial the last four digits
 
Try this for these two lines:

Translation pattern 123.!
Discard digits PreDot

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top