Transition to a 6 digit dial-plan?

[SWITCHDOG]

Starting the prep work to transition to a 6 digit dial plan. We will be inserting the leading digit 8x in front of the current 4-digit extensions.

At the moment, the dial plan analysis shows 8 as a four digit ext. I need to change this to a length of 6 digits. After making the changes below, the SAT returns “ This entry has assignment; remove objects with these leading digits“

• Removed/renumbered the extensions that are in the format 8xxx
• Removed/renumbered the VDN that are in the format 8xxx
• Removed/renumbered the hunt group numbers that are in the format 8xxx
• There are no TAC/DAC in the format 8xx
• AAR has no entry for 8
• There is not an entry in UDP for this string.

Anyplace else where I should look?

Edit: Added wrong lenth, changed to 6 digits

 

[iggy1952]

SWITCHDOG,

Its sounds like you are moving from a 4 to 6 digit dial plan. If so this requires a complete rebuild of your software translations as this impacts extension length, FAC, DAC, ARS, AAR, trunking, etc..

iggy1952

 

[SWITCHDOG]

iggy1952,
Understand that - The problem is freeing up the leading digit 8 to do so. I'm obviously missing one of the above locations.

The amount that the BP wants to do this warrants a solid evaluation if it can be done in house.

 

[lopes1211]

List Extension" should show the offender and tell you where to look (will show the 8xxx number and what it's used for). There are a lot of places it could be hiding. "Disp sys feat" could be one place.

-CL

 

[SWITCHDOG]

Maybe I'm asking the question the wrong way (would not be the first time)
I am moving to a 6 digit dialplan.

[ul]
[li]The leading digit of the new dialplan is 8 (8xxxxx)[/li]
[li]There are no extensions in the current dialplan beginning with 8xxx[/li]
[li]There are no VDN beginning with 8 (8xxx)[/li]
[li]There is nothing in change pub ext-digits 8xxx[/li]
[li]No TAC or DAC beginning with 8[/li]
[li]No loudspeaker paging codes beginning with 8[/li]
[li]Exported the vectors looking for stations listed there with 8xxx[/li]
[/ul]


When I try to delete the existing entry in the dialplan form (8xxx, lenth 4, type=ext, I still get the This entry has assignment; "remove objects with these leading digits"

Where else should I be looking?

 

[kyle555]

list extension

 

[DAVIDPAYNE]

List extension should show you what is using and 8xxx number. This is not the same as a list station, which only shows you stations.