Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transient switch suppementary services

Status
Not open for further replies.

trond456

Technical User
Dec 9, 2004
111
AE
Hello,
In my scenario, the MD110BC13 works as a transient switch between the BP250 and Alcatel to acheive Qsig between the three sites and this scenario works fine for the basic call features (CLIP, name) bewteen the three sites.

But I have a problem with the call back and follow me features.
The callback feature is acheived between the MD110 and BP250,and also is acheived between MD110 and ALcatel.

But,I failed always to request a call back from the BP-ALcatel (through the the transient(TSW)), so is there any special configuration in the TSW to pass this request from BP-Alcatel?
Below you find my ROCAP,RODAP, RODDP.
Route 90 (MD110-ALCATEL)
ROCAP:ROU=90;
90 7110000000000010 5 2110000000 0 5 128 00151515 311110000031 001100
RODAP:ROU=90;
90 SL60 H'00000350 H'35440000 H'06300000
RODDP:DEST=90;
DEST DRN ROU CHO CUST ADC TRC SRT
1 90 15050000000002501050000010 0 1

(Route 91 MD110-BP250)
ROCAP:ROu=90;
91 7110000000000010 5 2110000000 0 30 128 00151515 311110000031 001100
RODAP:ROU=91;
91 SL60 H'00000350 H'15400000 H'06B00000
RODDP:ROU=91;
DEST DRN ROU CHO CUST ADC TRC SRT
4 91 15051000000002500050000000 0 1

_____________________________________________________

Also I have a problem in the follow me feature:
when ASPAP:pARNUM=223=7;follow me works fine with Alcatel but doesnt work with BP.
When PARNUM 233 = 0,(call diversion is acheived using proprietry) follow me works find with BP but doesn't work with Alcatel.
Is there anyway to have the both systems working when request follow me??






 
yes it supports, but when you make a Qsig between BP and MD110 you should use UUS (proprietry)to be able to support the proprietry services like call back and follow me.
IN BP, Qsig networking with vendors is only supports basic features (name and number).

So did any on try before to conenct the MD110(qsig) as a transient PBX with other two pabxs (two other vendors) and got the supplemetary services??
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top