Transfering Calls Via MCDN

[nortechie]

How do you transfer calls over a private SL-1 network
I have 2x MICS 6.1 with centralized VM. I can intercom, grab trunks from both sides and the centralized VM works fine.... but I can not transfer a call that goes to the wrong ext. back over the private SL-1 network.
is this a problem with the 6.1.
I have it working on a 5.0 with a M-1 and 4 MICS 6.0's
and coppied the info and settings from the 6.0 to the 6.1 and it does not work. is there any diference.

 

[senk1s]

little bit more detail about the call you are not able to transfer ... i couldnt understand what the problem is.

As far as i know 6.0 fixed some problems of 5.0 networking

 

[nortechie]

senk1s
A call comes in to an ext.
It is the wrong ext. or even to reception.
it can be on the public PRI or even loop start trunks.

the call can not be transfered to another ext. on the slave sytem, or vice versa. but intercom and Cen.VM works great.

I have checked the programming on the other systems that have worked OK, and copied them to the 6.1, and it still will not work.

any suggestions

 

[senk1s]

6.1 has something called trunk anti tromboning prevention ... which is what you are explaining ... i'll try to dig something up and find out if there is a solution for this issue

 

[ComDawg]

I am having a similar problem with my setup as well. I am very interested in hearing about your 5.0 to M1 setup. As I am trying to connect an M1 to a Norstar 6.1. Any information would be appreciated.

Thanks in advance!