Transfer in Opensqape Echoserver

[Karmozdi]

hello
I have a question about OS4K version 10.
When a secretary calls a mobile and wants to transfer this communication to his boss, the call will be returned to him as soon as the secretary hangs up. Please tell me what to do so that the transfer does not return
Best regards .
.................
ADD-TDCSU:NEW,1-01-012-0,120,120,0,0,102,1,1,"ISDN ",10,ETSI,8,,NONE,,,,GDTR,N,CO,NONE,N,0,,00,0,,,,31,MANY,10,0,1,1,EMPTY,10,5,N,,,,,,16,8,0,10,,EC&G711&G729A,,30,CIR,Y,TRADITIO,0,60,60,S2COD,1&&30,N,1,1,0,0,0,0,0;


ADD-COP:120,ANS,TA,TA;
CHANGE-COP:120,COPADD,,,,S2CONN,;

ADD-COT:120,RCL&XFER&ANS&KNOR&CEOC&CEBC&TIE&CBBN&CBFN&FWDN&FNAN&BSHT&FWDR&DPRE&LWNC&ATRS&NLCR&TSCS&ICZL&ICZO&TRSC&DFNN&CFVA&NITO&NTON;

ADD-COSSU:,102,,,,,,,,;
CHA-COSSU:COS,102,TA&TNOTCR&CDRINT&SCRSPC&RKOABS&COSXC
D&MB&TRACE;
CHA-COSSU:COS,102,CFNR&VCE&FWDNWK&SUBCAL&SUBDB&SPECAR&CFB&FWDFAS;
CHA-COSSU:COS,102,FWDDIR&CFSWF&FWDBAS&FWDECA&SUBEPP&CW&UUS1IM&UUS3;
CHA-COSSU:COS,102,CFKL;
CHA-COSSU:COS,102,,NOCO&NOTIE;
CHA-COSSU:COS,102,,,NOCO&NOTIE;

ADD-SBCSU:4030,OPTI,DIR,1-7-10-23,OPTIP500,1,1,1,4,4,1,1,0,0,N,0,20,0,2,N,2,28,Y,,,Y,0,N,N,N,Y,N,,,,,,,,5,,,,N,NORMAL,Y,ENGLISH,0,ALL,,0,,,,,,,,,,,,,,,,,;


CHA-ZAND:ALLDATA,EXTEND,NO,TA,NO,NO,TA,NO,MUSIC,TONE,15,YES,YES,DDMM,0,NO,1,,80,100,NO,NO,1,NO,0,5,NO,,MODE1,,NO,NO,NO,YES,YES,YES,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO,YES,YES,YES,NO,NO;
CHANGE-ZAND:TN,10,07,07,7;
CHANGE-ZAND:TONES,OVRTN,0;
CHANGE-ZAND:TONES,CAMP,0;
CHANGE-ZAND:TONES,CONFTN,0;
CHANGE-ZAND:TONES,OVR,0;
CHANGE-ZAND:TONES,KNCONF,0;
CHANGE-ZANDE:ALLDATA,NO,NO,YES,NO,NO,NO,NO," AP-EMERGENCY ",NO,NO,NO,NO,NO,NO,NO,NO,,NO,NO,NO,NO,NO,NO,NO,UNKNOWN,ETSIFSK,NO,NO,NO,NO,NO,0;
CHANGE-ZANDE:ALLDATA2,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO;
CHANGE-ZANDE:OPTISET,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO;
CHANGE-ZANDE:MLPP,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO,NOMETHOD,NO;
CHANGE-ZANDE:ATND,NO,NO,NO;
CHANGE-ZANDE:ACD,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO,NO;
CHANGE-ZANDE:KEYSYS,NO,NO,NO,NO;
CHANGE-ZANDEMC,NO,NO;
CHANGE-ZANDELS,0.0.0.0,10444,NO;
CHANGE-ZANDE:SECURITY,NO,TRADITIO,TRADITIO,SECURE,SECURE,128BIT,MIKEY1,STANDARD,NO;
CHANGE-ZANDENS,0.0.0.0,0.0.0.0;
CHANGE-ZANDE:ACL,NO,YES,NO;
CHANGE-ZANDE:ADDR,,,;
CHANGE-ZANDE:OSMO,,0,0,0,NO,NO,RTP,RTP;
CHANGE-ZANDE:OSMO,,,,,,,,,CF&SST&HF&SIP&SEHO&SDND&CSC&FC1&GPC;
CHANGE-ZANDE:OSMO,,,,,,,,,,UNDEF,UNDEF;
CHANGE-ZANDE:OSMO,,,,,,,,,,,,,0.0.0.0,0,,0.0.0.0,0;
CHANGE-ZANDE:OSMO,,,,,,,,,,,,,,,,,,,0.0.0.0,0,,0.0.0.0,0,,0.0.0.0,0;
M2 2 CHA-ZAND:ALLDATA2,5,YES,YES,NO,YES,NO,YES,NO,10,NO,NO,NO,NO,NO,NO,ONHOOK,CENTER,HICOM,YES,NO,STANDARD,NO,YES,NO,1,NO,YES,"UNKNOWNNO ",YES,NO,NO,NO,ENGLISH&AMERICAN&GERMAN&FRENCH&SPANISH,YES,NODIV,NO,NO,NO,SWITOVER,YES,NO,
YES,NO,,YES,BOTHDNIS,NO,YES,NO,0;
CHA-ZAND:OPTISET,24HOUR,EUROPE,ENGLISH&ENGLISH&ENGLISH&ENGLISH&ENGLISH,19,4,2,2,1,4,NORMAL,80,7,YES,2,NO,4,2,3,NO,NO,NO,YES,NO," MELLAT BANK",YES,NO;