Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transfer getting completed but display in the phone shows late

Status
Not open for further replies.

hussainvlr

IS-IT--Management
May 17, 2017
27
QA
I have Avaya SIP 9621G Phones connecting with Alcatel OmniPCX Call server

when we transfer the call from Avaya Phone-A to any Avaya-B or Alcatel Phone.


In Avaya Phone-A transfer is happening once press "complete" button but in the display on Phone-A still showing in conversation after 1 mins 20 sec it showing in the phone display as"Transfer completed"

Any suggestions experts ?
 
You seem like you got stuck with a office of Avaya phones and someone wants that to work on your Alcatel PBX because everything is SIP so it should all just work :)

Try this setting maybe?

## PROVIDE_TRANSFER_TYPE provides the call transfer type in 3rd party environments.
## No meaning for Avaya environment
## Value 0 or 1 (default 0)
## SET PROVIDE_TRANSFER_TYPE 0
##
## CALL_TRANSFER_MODE determines the call transfer mode in 3rd party environments.
## Value 0 or 1 (default is 0)
## SET CALL_TRANSFER_MODE 0

But, I've got a question for you! Why are you doing this? The Avaya SIP phones support basic SIP up to a point, but I'd strongly recommend very detailed testing and have that 46xxsettings.txt file locked down and carved in stone to be able to guarantee predictable behaviour. If you're playing in a lab because you happen to have Avaya phones, then go wild and change stuff, but if this is a production environment, you shouldn't be having these questions this far into the game!
 
I tried but the call getting transferred after the call gets transferred again from the extension where the transfer got initiated still showing in conversation also after 1 mins 12 sec it shows “Transfer compelted” and the line is busy until it shows the message
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top