Traffic data on SMDR port

[bigtee959]

My vendor has setup port one on my CS1k to output SMDR data. I asked them to also turn on the traffic data so my call accounting provider can process the attendant console information. When I look at the SMDR raw data file I can see the calls with times, dates and numbers dialed but when the traffic information is outputed it is garbage. Looks like the settings are not correct. I contacted my Call Accounting provider and they informed me I have to setup the traffic ports baud rate and parity. Is that so? Don't I just setup the port not the information that is being printed. The CDR looks fine...the traffic data is garbage.

HELP

T.
Example
08/09/2007 12:00:32 L 061 00 81550 81383 08/09 12:00 00:01:12 0000 0000

08/09/2007 12:00:34 N 062 00 81298 A000 044 08/09 11:58 00:02:16 A 7000018009754722

08/09/2007 12:00:42 & 0000 0000

08/09/2007 12:00:42 N 063 00 A000 018 81388 08/09 11:49 00:10:58

08/09/2007 12:00:43 & 0000 0000 7168498484XXXXXX
)6Vv54j0AYaC
08/09/2007 12:00:43 A $0A $2Av)a1Id0Ad0I $
)T!3Uv 54jL0I)!C
08/09/2007 12:00:43 AF$0A&vd
dC
08/09/2007 12:00:43
)SfM7 QeTjL0IY!C
08/09/2007 12:00:43 Ad0Av$
$C
08/09/2007 12:00:43
)6Vv54jL0IYaC
08/09/2007 12:00:43 A&d0AFFF$
d
)Ta3Uv54jL02
VH!C
08/09/2007 12:00:43 EVf $0AV $
dC
08/09/2007 12:00:43 5$ffM7 QeThL03
VaC
08/09/2007 12:00:43 A $
)d9]Fd AdC
08/09/2007 12:00:43
)6Vv 54j1E)aC
08/09/2007 12:00:43
$0AF $C
08/09/2007 12:00:43 )T!3Uv 54j1I)a Ad0A $C
08/09/2007 12:00:43 )Ta3Uv 54j0E)aC
08/09/2007 12:00:43 0AdTU4H A$0A $ Ad A$0Ad A $C



Terence Phillips
Telecommunication Specialist

 

[johnpoole]

i would dump that to a serial port and see if th eproblem persist

john poole
bellsouth business
columbia,sc

 

[bigtee959]

??? I'm sent this to TTY1 a serial port already.. Do you mean send to data to another serial port to test. I also have the traffic data printing to TTY4 where I have hyperterminal setup with capture turned on. No problem on that port.

Thx
T


Terence Phillips
Telecommunication Specialist