Tracking on Base Station 1

[Didier81]

Hi,

We lost a DECT in our infrastructure, and I have to find
I have an AMO command to see if the DECT is on or off and how SLC but not on which base station the SLC.

Who can help me?
It's very important.

Thanks a lot.

 

[toppmoeller]

the only way if i remember well is using hipath manager and performance management but not sure about this let me check....
no
you can find only slc
SIEMENS HiPath
Cordless Stays per Extension

stn orig nodeand pen visited node visited slc
68001 MXP3 1-4-103 MXPN 1-3-103 01:38:00 23.0 Yes
68001 MXP3 1-4-103 MXPN 1-6-67 00:05:00 1.0 Yes
68001 MXP3 1-4-103 MXPN 1-7-67 00:01:00 0.0 Yes
68001 MXP3 1-4-103 MXPN 1-5-103 00:29:00 6.0 Yes
68001 MXP3 1-4-103 MXPN 1-4-103 00:04:00 0.0 Yes

the quickly way is to check dis-slcbpsc,data,ltu,cct ecc byte 37-38 is the slc id (hex)

 

[Didier81]

Hi,

Thanks for your answer.
I know this command but it gives me only the SLC not which the base station.

No way to kown on which base station a lost DECT is on? Strange.

 

[Didier81]

It's impossible!

There must be a command that tells us about what antenna is connected to the DECT.
It tells us if the DECT is turned on or not and what it is SLC.
The PABX knows where it is connected. Why do not we learn?