Tracker locked

[lpghs]

Wrong termial type entered, Can not get access to site to reset , how do I log out?

 

[Stu4rtc]

If you dial back in to the site and you find that the port on the tracker is busy, you can reset the port by following the instructions in thread 690-261817.

"
You need to hit return twice after entering ;ME to get the logon prompt. If you get a flashing cursor and no logon the port could be locked, try this command: -
First enter ;EM Y at the 1> Prompt (This switches on echo mode, so you can see what your doing).
Second enter ;CM and hit enter, you will now get: -


Configuration of port 1
-----------------------
Soft handshake : Off
Hard handshake : On
Time stamp : Off
Data inhibit : Off
Baud rate : 9600,N,8,1

You now need to enter ;CM N,Y,N,Y and hit return
This will toggle the data inhibit to on, you then need to reset it by using ;CM N,Y,N,N and hit return.
You should now be able to use ;ME <return> <return> to get the logon prompt.
&quot;

You should then be able to login as normal. Use ;ESC and ;QT after you have logged off.

 

[Stu4rtc]

There is some information on the Avaya UK site.

http://www.avaya.co.uk/Support/FAQs/default.asp#11