Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

trace/status loudspeaker paging

Status
Not open for further replies.

AVAYAPro

Vendor
Sep 2, 2008
215
US
How would one go about getting a trace or status of a loudspeaker paging TAC?

I have a station which has accidentally seized a loudspeaker paging trunk a couple of times for extended periods of time and I need to figure out the culprit extension.

Any input would be helpful.

Thanks mates.

ACS - IP Office Implement
ACA - IP Telephony Implement
CCNA - Cisco Certified Network Associate
MCP - Microsoft Certified Professional

love me some stars
 
Hardware platform? Definty / CM software version?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
S8730 configuration

CM 5.2.1

ACS - IP Office Implement
ACA - IP Telephony Implement
CCNA - Cisco Certified Network Associate
MCP - Microsoft Certified Professional

love me some stars
 
which paging zone?

You can do mst trace

Call trace? y

UID 880001 for zone 1
UID 880002 for zone 2

enable the trace and disable it after the capture.

status mst

decode the mst trace with your web browser



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
What level of login do you need to perform this?

I'm no longer at "Vendor" status as my user name suggests so my permissions are below those of dadmin.

ACS - IP Office Implement
ACA - IP Telephony Implement
CCNA - Cisco Certified Network Associate
MCP - Microsoft Certified Professional

love me some stars
 
customer super-user login level should work.

Command: status mst
Command: display mst
Command: change mst default (this will initialize any previous data)
Command: clear mst
Command: enable mst
Command: disable mst
Command: list mst


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top