Tought time with 9608 1

[RickKeifer]

Guys,

Having a tough time getting these 9608 phones to work with my ipo 500v2 v 8.1
I hardcode all addresses so dhcp is never an issue. i am putting in the exact same settings that i do for the 9650's which work perfectly.
everything works great in the setup process (going through craft then putting in the ip addresses, etc.).
Once i put in the extension then enter (works)
Then i put in a blank password then enter the whole think locks up.

I have 6 of these and tried it on every one so i know it isnt a specific phone issue.

What am i doing wrong? Like i said the 9650 which have an identical interface work like a charm.

RK

 

[tlpeter]

Ok not a V2
Then enable IIS on the VMPro server and redirect the folder to the manager folder.
Then it will work fine.
Put the file server type on other and not on manager and it will work.


BAZINGA!

I'm not insane, my mother had me tested!

 

[RickKeifer]

als where are the setting for autocreat extension.\

 

[IPGuru]

Did you upgrade the IPO to V8.1 correctly ? including transferring all of the bin files?
even when doing a rebuild using an sd card reader on your pc (the preferred method) it will a considerable time so it is easy to quit the process prematurely.


A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear

 

[tlpeter]

It is on the lan settings tab and then voip and or sip

BAZINGA!

I'm not insane, my mother had me tested!

 

[dango510]

The IP Office system is currently not supported as a file server for 9608, 9611, 9621, and 9641 phones.
This also applies to using the IP Office Manager application acting as the file server. These phones are
only supported when using a 3rd-party file server.

 

[AndrePa]

With the latest firmware, I have gotten 9608 to load on 500 / 500v2 using SD/ CF Cards. The key is upgrading one at a time! Then wait, they take a long time to upgrade.

On 9608 Phones craft menu make sure phone is set as H323, not SIP, not Auto!

Andre