Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Total Disk Space?? 2
- Thread starter jkc924
- Start date
Guest_imported
New member
- Jan 1, 1970
- 0
jkc924,
here's the basic:
1. lspv
- will tell you how many hardisk/s you have on your system
2. lspv hdisk# (where # = the disk number)
3. lsvg
- show you how many VG's you have on your system
4. lsvg <VG>
- will show you volume group's details; the size,used & free PP in MB, noting that volume group may contain several hard disk/s.
***NOTE****
1,000 MB = 1GB
This is just to start working.
here's the basic:
1. lspv
- will tell you how many hardisk/s you have on your system
2. lspv hdisk# (where # = the disk number)
3. lsvg
- show you how many VG's you have on your system
4. lsvg <VG>
- will show you volume group's details; the size,used & free PP in MB, noting that volume group may contain several hard disk/s.
***NOTE****
1,000 MB = 1GB
This is just to start working.
Guest_imported
New member
- Jan 1, 1970
- 0
or you can try this:
lscfg -vl hdisk#
- where # is the disk number, say;
lscfg -vl hdisk0
check first how many disk/s you have on you system by:
lspv
lscfg -vl hdisk#
- where # is the disk number, say;
lscfg -vl hdisk0
check first how many disk/s you have on you system by:
lspv
-
1
- #4
I have a script that I got from The AIX Survival Guide by Andreas Siegert -- the best book for AIX, except it is getting really dated. Some of the stuff is still relevant.
This script goes out and lists each disk, telling you how much space is left on each disk. This is sort of a summary. Then it lists each mount point and how much disk space each mount point is taking and on what disk.
If you post your email, I will send it to you. It will make your life a whole lot easier. (I'll also send you my other script that gathers other info about the system. I use it as part of my "disaster recovery" routine.)
This script goes out and lists each disk, telling you how much space is left on each disk. This is sort of a summary. Then it lists each mount point and how much disk space each mount point is taking and on what disk.
If you post your email, I will send it to you. It will make your life a whole lot easier. (I'll also send you my other script that gathers other info about the system. I use it as part of my "disaster recovery" routine.)
Hi,
when you have choosen the right command to retrieve
total-used-free space, I suggest to enable your client
to romote shell from (root@yourmachine) (.rhost)
Then, on the server, (or in a your machine) build
a script that loops in a list of your clients, then
executes the 1st script (lsvg...) . You can put this
script on the server, mounted by NFS, so that you can
modify it without download each time on client.
Clicking a button, after some minutes you can know:
1) if the client is on
2) total space
3) any other thing that you can want know
4) you can print them, and why not, see it on a web page
5) it is not Tivoli, but it's yours .
bye.
when you have choosen the right command to retrieve
total-used-free space, I suggest to enable your client
to romote shell from (root@yourmachine) (.rhost)
Then, on the server, (or in a your machine) build
a script that loops in a list of your clients, then
executes the 1st script (lsvg...) . You can put this
script on the server, mounted by NFS, so that you can
modify it without download each time on client.
Clicking a button, after some minutes you can know:
1) if the client is on
2) total space
3) any other thing that you can want know
4) you can print them, and why not, see it on a web page
5) it is not Tivoli, but it's yours .
bye.
Einstein47
Programmer
Hi bi,
For the risk of sounding like a broken record ... I'd be interested in your scripts too.
daveh@email.utcourts.gov
Thanks a ton - you know you really asked for this![[wiggle]](/data/assets/smilies/wiggle.gif "[wiggle] [wiggle]")
Einstein47
("For every expert, there is an equal and opposite expert." - Arthur C. Clarke)
For the risk of sounding like a broken record ... I'd be interested in your scripts too.
daveh@email.utcourts.gov
Thanks a ton - you know you really asked for this
Einstein47("For every expert, there is an equal and opposite expert." - Arthur C. Clarke)
Guest_imported
New member
- Jan 1, 1970
- 0
Hi bi,
I've been assigned to set up DR center...I'm raw in this area, would appreciate u can send your script to
wong.foongtai@allianz.com.my
10q.
I've been assigned to set up DR center...I'm raw in this area, would appreciate u can send your script to
wong.foongtai@allianz.com.my
10q.
I created some FAQ's regarding disk space in Unix Scripting Forum.
--
| Mike Nixon
| Unix Admin
| ----------------------------
--
| Mike Nixon
| Unix Admin
| ----------------------------
- Thread starter
- #16
-
1
- #18
By the way, here are a couple scripts I have written for drive space...
******************************************************
# Script1
set -A dlist `lspv | awk '{print $1}' | sort -A`
maxdr=`lspv | wc -l`
let count=0
while (($count < $maxdr));
do
lspv ${dlist[count]}
lspv -l ${dlist[count]}
echo "-------------------------------------------------------------------------"
let count="count + 1"
done
******************************************************
# Script2
vgexclude1="rootvg"
vgexclude2="sysredorollvg"
set -A dlist `lspv | grep -v $vgexclude1 | grep -v $vgexclude2 |awk '{print $1}'`
set -A vglist `lspv | grep -v $vgexclude1 | grep -v $vgexclude2 |awk '{print $3}'`
maxdr=`lspv |grep -v $vgexclude1 | grep -v $vgexclude2 | wc -l`
let count=0
let systotal=0
let sysfree=0
while (($count < $maxdr));
do
ppsize=`lspv ${dlist[count]} | grep "PP SIZE" | awk '{print $3}'`
pptotal=`lspv ${dlist[count]} | grep "TOTAL PPs" | awk '{print $3}'`
ppfree=`lspv ${dlist[count]} | grep "FREE PPs" | awk '{print $3}'`
ddtotal=$(($ppsize * $pptotal))
ddfree=$(($ppsize * $ppfree))
systotal=$(($systotal + $ddtotal))
sysfree=$(($sysfree + $ddfree))
echo ${dlist[count]}
echo ${vglist[count]}
echo "Total: $ddtotal Meg"
echo "Free : $ddfree Meg"
echo "-------------------------------------------------------------------------"
let count="count + 1"
done
echo "System Total, Excluding: $vgexclude1 and $vgexclude2"
echo "System Total: $systotal Meg"
echo "Total Free : $sysfree Meg"
******************************************************
# Script1
set -A dlist `lspv | awk '{print $1}' | sort -A`
maxdr=`lspv | wc -l`
let count=0
while (($count < $maxdr));
do
lspv ${dlist[count]}
lspv -l ${dlist[count]}
echo "-------------------------------------------------------------------------"
let count="count + 1"
done
******************************************************
# Script2
vgexclude1="rootvg"
vgexclude2="sysredorollvg"
set -A dlist `lspv | grep -v $vgexclude1 | grep -v $vgexclude2 |awk '{print $1}'`
set -A vglist `lspv | grep -v $vgexclude1 | grep -v $vgexclude2 |awk '{print $3}'`
maxdr=`lspv |grep -v $vgexclude1 | grep -v $vgexclude2 | wc -l`
let count=0
let systotal=0
let sysfree=0
while (($count < $maxdr));
do
ppsize=`lspv ${dlist[count]} | grep "PP SIZE" | awk '{print $3}'`
pptotal=`lspv ${dlist[count]} | grep "TOTAL PPs" | awk '{print $3}'`
ppfree=`lspv ${dlist[count]} | grep "FREE PPs" | awk '{print $3}'`
ddtotal=$(($ppsize * $pptotal))
ddfree=$(($ppsize * $ppfree))
systotal=$(($systotal + $ddtotal))
sysfree=$(($sysfree + $ddfree))
echo ${dlist[count]}
echo ${vglist[count]}
echo "Total: $ddtotal Meg"
echo "Free : $ddfree Meg"
echo "-------------------------------------------------------------------------"
let count="count + 1"
done
echo "System Total, Excluding: $vgexclude1 and $vgexclude2"
echo "System Total: $systotal Meg"
echo "Total Free : $sysfree Meg"
- Status