endlesswinter
IS-IT--Management
i've got a toshiba strata dk wondering if anyone knows how to program inernal auto dials to buttons?????
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
toshiba strata dk button programing 1
- Thread starter endlesswinter
- Start date
- Status
If you're talking about a DSS (direct station selection) button,that is done in program 39. You go to the extension DN number and assign the proper code for station DSS on the button you want to use. If you're not familiar with Toshiba programming, or have a manual, it might be a little difficult.
- Thread starter
- #3
endlesswinter
IS-IT--Management
how do i get to program 39?
-
1
- #4
jasondotcom
IS-IT--Management
which strata dk do you have? if it is a 16 or a 40 you can hit *#*#1*2*3 then speaker, hold, 39, port you are programming i.e. 000 for your first port, # then press the button you are trying to program and put in the station by using the port data i.e 003 for port 4 (x203 or x13) then hit speaker # # speaker # # to exit programming
- Status
Similar threads
- Locked
- Question