Toshiba digital station voltage

[fiberman40]

Can anyone tell me the output voltage of the Toshiba DK 280 digital station port. I am having lightining damage problems with remote stations and I need to replace the protector modules in my entrance protectors.

Thanks

Joey


I WILL FISH FOR FOOD

 

[daronwilson]

I would guess 24 or 48 volts, certainly no more than that from my experience. I'd just meter them and be sure, then use the lowest voltage protector that meets that requirement. Safest way would be to meter with it unplugged and with the set plugged in.

Good Luck!

It is only my opinion, based on my experience and education...I am always willing to learn, educate me!
Daron J. Wilson, RCDD
daron.wilson@lhmorris.com

 

[PHONEMAN1234]

I'VE HAD THE SAME LIGHTNING PROBLEM WITH SEVERAL CUSTOMERS, WITH TOSHIBA DIGITALS PHONES.

INSTALLED DITEK LIGHTNING PROTECTION WITH 27 VOLT CLAMPING,
THE PROBLEM FIXED!!!!