Toshiba CTX100 Question - Assume 9 programming

[namesrhard2pick]

Hello,

I have a site that has Verizon centrex lines and had to dial a 9 to get an outside line, I suspect this is the PBX configuration by default. I moved the lines to another provider in which they do not support assume 9 feature. So now, the site has to dial 9, 9 then the number. Is there a way to program the switch to look for a 9? The site will need still dial a 9 because thats what the CO is looking for, but at least it will be only one.

Thanks.

 

[SYQUEST]

You would probably program the 9 in an ARS table or equivalent. I don't know what the Toshiba provides, but most of the hybrids work about the same way from my experience. You might want to read the documentation.

....JIM....

 

[rgiuliani]

You will need to program the LCR. I believe the Assume 9 is only for Destination Restriction.

You need to add leading digit of 9 to your LCR routes.