Tone Board Warning

[josiecza]

CM 3.1.2

When I display alarms I come up with the following Warning on a tone board. Any ideas on how to clear it?

Port Alarm Type Maintenance Name
00A WARNING TONE-BD

When I display errors Ii get the following

Port Mtce Name Err Type Aux Data
00A TONE-BD 18 0

Thank You

 

[AvayaTier3]

Error type 18 is busied out

release busy

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[josiecza]

Thanks for the reply, I know Error Code is 18 is busied out. The problem is I do not know what to release. Maybe I should have stated that earlier. I assume it's an IPSI but I'm not sure how to figure out which one.

 

[AvayaTier3]

did you remove a cabinet in the recent past?



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[josiecza]

Actually yes, a couple months ago, September timeframe.

 

[AvayaTier3]

add the cabinet back in and the alarm will change to a valid slot. You should then be able to change circuit-pack xx for you cabinet and blank out the ipsi board, then remove the cabinet. If that will not fix it, I can fix it for you in the software tables of CM. contact me if you need help with this.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com