To Change IDGT to Different CDGT 1

[wilson2468]

I need to change some IDGT numbers in our Nortel system.

I created a document (I am not a Nortel guy) the first time I did this and I was wondering if someone could take a look and let me know if anything is missing.

Also, could someone let me know if in my document, I have saved the config ( I am not sure what saves the changes that have been made):


To Change IDGT to Different CDGT

Make sure CAPS LOCK is turned on:

Enter
LOGI Name Here
PASS password here
> LD 49 <Enter>
REQ CHG <Enter>
TYPE IDC <Enter>
CUST 0 <Enter>
DCNO 0 <Enter the number of the DCNO>
IDGT 1733 <Enter>
1733 1014 <Enter>
IDGT <next number to change or Enter to go back to REQ>

REQ CHG <Enter>
TYPE IDC <Enter>
CUST 0 <Enter.
DCNO 1 <Enter>
IDGT 1733 <Enter>
1733 1014 <Enter>
IDGT <Enter> To go to DCNO 2

REQ CHG <Enter>
TYPE IDC <Enter>
CUST 0 <Enter>
DCNO 2 <Enter>
IDGT 1733 <Enter>
1733 1014 <Enter>
IDGT 2105 <Enter>
2105 1014 <Enter>
IDGT 2150 <Enter>
2150 1014 <Enter>
IDGT 6711 <Enter>
6711 1014 <Enter>
IDGT 7611 <Enter>
7611 1014 <Enter>
IDGT <Enter>
REQ <Shift> **** <hold shift and enter ****>
> LOGO

 

[GHTROUT]

Your document looks fine. But, since you are not sure of everything yet, you should make sure you have a text/paper copy of what you have before you start making changes.

-You will want to print all the TYPE RDB(s) in LD21
-You will want to print all the TYPE IDC(s) in LD49
-The make your change and verify it works - then print out the IDCs again to see the "before and after".
-To commit your changes to disk, go to LD43:
LD43
.EDD (return)
(now wait until you get the "complete" and the "dot"



GHTROUT.com | FAQs | Recent Replies

 

[wilson2468]

Thanks for the reply,

But what line saves the config once the changes have been made?

 

[wilson2468]

Sorry,

didn't read all of your post.