Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TN750C Announcement Card is full ... can I change Bit Rate to get more storage?

Status
Not open for further replies.

Ryckee

IS-IT--Management
Apr 3, 2013
34
US
We have a single TN750C Announcement Card and it is full. We actually created a new announcement without checking the storage and figured out why we could only record 5 sec of announcement, which in turn then flaked out the card and is now reporting an error type 14 aux data 4, which indicates, "Error Type 14 This error is logged whenever the Announcement Checksum Test (#209) fails. The Aux Data indicates the identifying number of the first defective announcement found." We don't seem to have any issues ... except for the Alarm / Errors now and I am working with our service provider to resolve that.

Now to my point. Can we simply change the Bit Rate from 32 to 16 to get more recording time and/or if so, will that have any effect on the current announcements, corruption, quality ... presumed will see if noticable, etc.?

list integrated-annc-boards SPE A

INTEGRATED ANNOUNCEMENTS
Board Location: 01A09 Time Remaining at 32Kbps: 6

Annc. Internal Announcement Length in
Number Number Extension Name Rate Seconds
3 1 2252 DID INTERCEPT 32 15
1 2 2254 XXXXXXX PHONES 32 14
2 3 2255 NIGHT RECORDING 32 13
4 4 5190 XXXXXXXXX SURGICAL 32 12
5 5 2721 XXXXXXXXX 32 10
6 6 2413 XXXXXXXXXX2ND ANNC. 32 17
7 7 2516 XXXXXXXXXXXXMain # 32 28
8 8 5991 2nd oper DELAY ANNOUNCEMENT 32 13
9 9 2517 1st OPER DELAY ANNOUCEMENT 32 9
10 10 2944 XXXXXXXXXXNITE 32 34
11 11 5556 XXXXXX 32 10
12 12 2017 XXX 32 75
13 13 5557 XXX NEW 32 0

Tx - Ryckee
 
no because all were recorded at 32 bit, so delete them one by one and then rerecord at 16 bit is the only way I know of to do this.

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.
 
Just add another TN750C. They're very cheap. You should also be backing up your announcement board to the removable media (flash card/MO Cartridge).

Kevin
 
You will need to erase the board, change bit rates, re-record the announcements.
You will only get 255 seconds per board.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Like 4merAvaya said if you have a spare slot add another 750C...man you can buy one for cheap...cheap..Not worth the hassle of doing your announcements again...

...bob...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top