TN password?

[stuzzy]

I am trying to set up a new IP phone. I'm not having any problem with initial set up, but after I enter the node it prompts me for a password, which I get wrong, and then it jumps to a screen where it says invalid TN and the TN is all 0's. It won't let me enter a TN. I'm assuming the password is to enter a TN but how do I find out what that password is?

I tired the default color*set but that's not it. I'm thinking it is set in the CS1000 but where?

 

[Firebird Scrambler]

Are you referring to the SCPW passcode?. Or is it this below?.

You are prompted to enter the fixed password 26567*738 (color*set)

can also be set for 1140E and 1150E sets

Please also be aware of nodePwdShow which is another possible password on the system.
It can be printed from Element manager
S/S...IP TELEPHONY....NODE...GEN COMMANDS...NODEPWDSHOW...RUN....it tells you the password
Or directly from a Telnet session.
Other pwd commands are
nodePwdSet Set password for current node
nodePwdShow Show node password setting
nodePwdEnable Enable node password setting
nodePwdDisable Disable node password setting
nodeTempPwdSet Set a temporary password for current node
nodeTempPwdClear Clear the temporary password for current node



All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[stuzzy]

That was it! Thanks. I should have known that... grr