What does it mean when I attempt to assign a TN to a digital set in CS1000 Telephony Manager and when I validate an error appears that reads, “Reserved Unit Type”? Where can I see what is assigned to that TN? It's not assigned to a Digital Set according to TM because it doesn't show up when I list ALL TN's. Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TN not showing up in Telephony Manager
- Thread starter telco101
- Start date
donaldbabcock
IS-IT--Management
LD20
prt
tnb
put in the TN number. this should show the type of asset that it is assigned to. Might be an ACD or something else internal to the switch.
prt
tnb
put in the TN number. this should show the type of asset that it is assigned to. Might be an ACD or something else internal to the switch.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question