Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TMU music on hold
- Thread starter samsal
- Start date
Satellite1900
Technical User
Hi,
You can connect the external source to the new TMU as you were using before, or use a WAV file.
If your PBX has a LSU-E can use the TMU or the VSU for the WAV file
If you have a MGU is simple to use WAV files.
WAV is the file format to be used for RVA messages, with one file per
message. The recording format is Pulse Code Modulation (PCM),
according to ITU-T recommendation G.711 (A- or m-law, mono,
sampling frequency 8000 Hz). Files must be stored in little-endian format
(which is normal when recording on an Intel-based PC). Standard tools,
such as Microsoft Sound Recorder, can be used.
\Satellite1900
You can connect the external source to the new TMU as you were using before, or use a WAV file.
If your PBX has a LSU-E can use the TMU or the VSU for the WAV file
If you have a MGU is simple to use WAV files.
WAV is the file format to be used for RVA messages, with one file per
message. The recording format is Pulse Code Modulation (PCM),
according to ITU-T recommendation G.711 (A- or m-law, mono,
sampling frequency 8000 Hz). Files must be stored in little-endian format
(which is normal when recording on an Intel-based PC). Standard tools,
such as Microsoft Sound Recorder, can be used.
\Satellite1900
- Status
Similar threads
- Question