freakinguru
Technical User
I have an Opt 11 Rls 5.0 with a TMDI tie PRI to the main site. Every night at midnight I get a DTA019 error, and every couple of nights I get a DTA019 followed by a DTA021 and the circuit dropping. At first I thought something in the routines was causing it, but the routines do not start until 1 am. I can't figure out what is causing it. It is not happening any other time of day...just after the clock turns over to midnight.
% TIM000 00:00 6/12/2010 CPU 0
%
% DTA019 6
%
% DTA021 6
%
% DCH055 DCH: 6 RLS RED ALRM TIME: 0:16:48 6/12/2010
%
% DTA022 6
%
% DTA023 6
%
% DCH054 DCH: 6 EST REMOTE TIME: 0:17:10 6/12/2010
%
% DCH054 DCH: 6 EST REMOTE TIME: 0:17:12 6/12/2010
%
% DCH055 DCH: 6 RLS NO EXT CLK TIME: 0:17:24 6/12/2010
%
% DCH1009 6 0035911C 00000010
%
% DCH054 DCH: 6 EST AUTO REC TIME: 0:17:24 6/12/2010
-------
% TIM000 00:00 7/12/2010 CPU 0
%
% DTA019 6
-------
% TIM000 00:00 8/12/2010 CPU 0
%
% DTA019 6
% TIM000 00:00 6/12/2010 CPU 0
%
% DTA019 6
%
% DTA021 6
%
% DCH055 DCH: 6 RLS RED ALRM TIME: 0:16:48 6/12/2010
%
% DTA022 6
%
% DTA023 6
%
% DCH054 DCH: 6 EST REMOTE TIME: 0:17:10 6/12/2010
%
% DCH054 DCH: 6 EST REMOTE TIME: 0:17:12 6/12/2010
%
% DCH055 DCH: 6 RLS NO EXT CLK TIME: 0:17:24 6/12/2010
%
% DCH1009 6 0035911C 00000010
%
% DCH054 DCH: 6 EST AUTO REC TIME: 0:17:24 6/12/2010
-------
% TIM000 00:00 7/12/2010 CPU 0
%
% DTA019 6
-------
% TIM000 00:00 8/12/2010 CPU 0
%
% DTA019 6