TMDI 107

[kodiak12]

Hi,

I was wondering if anyone has seen this error message before? Thanks

 

[bigindian65]

>err tmdi107
>

TMDI0107 x appl y
The Meridian 1 was unable to determine if downloading was necessary.
An SDL error message should accompany this message and describe the
reason for the failure. Three fields accompany this message: x = device
number (LD 17,DNUM), appl = the application name, and y is for design
use only.

Severity: Info

Mato' Was'aka

 

[johnpoole]

i've never seen it but i would disable the d.. ld 96 dis msdl x all, then enl msdl x

TMDI0107 x appl y
The Meridian 1 was unable to determine if downloading was necessary. An SDL error message should accompany this message and describe the reason for the failure. Three fields accompany this message: x = device number (LD 17,DNUM), appl = the application name, and y is for design
use only.

john poole
bellsouth business
columbia,sc

 

[kodiak12]

Hi,

I was able to do err tmdi107 to find out what it said about it, but I had never seen it before. Are you saying we should take down the D channel? Thanks

 

[Triton101]

If there was any maint or changes on the D you might have to .... but if everything is ok and you got this error ONCE then I would not worry.

If you do disable enable,

Disable the D
Disable the LOOP
Disable the TMDI

and in 96
RST TMDI X
ENL TMDI X FDL

ENL LOOP
ENL DCH (if it does not come up)

 

[kodiak12]

This error was printing out constantly, but was stopped by disabling the TMDI. Thanks

 

[tnphoneman]

I usually get this message when enabling the card. All I have ever done is disable reseat and redownload the TMDI.

 

[Tigernach]

I'm getting this message on a HA 5.0 system. Did you get any resolution on this?

 

[Tigernach]

I used the example that Triton101 gave and it cleared my system messages. The problem I had was how the TMDI's are addressed in the 5.0. It's DIS TMDI X X X, instead of DIS TMDI X.