TM 3.2

[NortelNewbee]

O.K. I have installed TM 3.2 on a windows 2k3 server and configured it to run as a standalone server. From what I understand, I can either use a serial or ethernet connection. I currently do not have a serial connection available on the server. is it possible to connect to a system/ site as is? I never used this application before; im insrtalling it because I was asked to now monitor billing/ call cost. Any cheat sheats out there to make the application connect? or, do I still need to do stuff on the system side (system/switch configurations). To put this in perspective, I AM NEW TO NORTEL as I just aquiresd this position, this is my second post. Thanks in advance for any help on this.

 

[SL1M1]

The minimum you will require is 2 PTY (ELAN) connections on the CS1K/PBX and you maywell want to book a TM/Billing course on TM3.2 alone on how to set this all up

Not the most popular application, you'll find on this forum. Essentially a web based and front end PBX management tool with the Billing segment/option offered by 3rd party application Avotus

Cheers!!

 

[NortelNewbee]

Thanks for your quick response and recomendation!!!

 

[dltmike]

As long as your system is configured with an ethernet connection as posted above it is very easy to connect to it with TM.

In the system properties there is a communications tab. In that tab under the default profile put in the IP of your PBX (core 0). Also, you need to go to Customer tab and create a customer 0 with the proper login username and password that is used for your PBX.

Let me know if you need more help.

Mike W.

http://www.dynalync.com