Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TM 3.2 Name changes

Status
Not open for further replies.

nconick

MIS
Sep 28, 2005
197
US
Can names be changed in TM and then "pushed" to the PBX? Also, are TN's "needed" for the Billing DB? Thanks.
 
Yes, but in my (very limited) experience, it is always better to make the changes in Element Manager because that is directly on the PBX. There are ways to synch TM with the PBX, but I have not been educated on that yet by my vendor.

I tried to take it one day at a time, but a whole bunch of them attacked me at once!
 
I use TM 3.1 at work and it works great you can actually change the name without any problem, TM actually 'read' the PBX everynight and then when you 'push' a change to the PBX it will change the information in it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top